WEISS GAMBIT ADC2 Instrucciones de operaciones descargar pdf (Pagina 2)

OPERATING INSTRUCTIONS FOR GAMBIT ADC2 24Bit / 192kHz A/D CONVERTER INTRODUCTION

Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 2

 +41 44 940 20 06  +41 44 940 22 14  http://www.weiss. ch [email protected]

INTRODUCTION

Congratulations on purchasing the Weiss Gambit Series ADC2 A/D Converter !

The ADC2 is a two channel A/D converter designed for

most demanding audio applications. It uses state of

the art A/D chips in Weiss Engineering’s proven

“correlation technique” configuration, which lowers

converter imperfections and improves the SNR ratio.

For best noise rejection, the analogue input signal is

kept balanced from the input connectors up to the

converter chips. A high quality microphone preamp is

available as a standard feature.

Additionally, there is a built-in digital two-segment

compressor / limiter for optimal levelling, employing

adaptive release timing, look-ahead circuitry and

sidechain-oversampling for mastering-quality

dynamics processing.

Large bar graphs, a well thought-out push button

array and uncluttered rotary knobs optimize handling

ergonomics.

Summary of ADC2 features:

Inputs

• Two balanced LINE and two MIC inputs on

separate XLR connectors.

• MIC input with switchable phantom power.

• Input sensitivity is settable in each channel

independently (or ganged) with two rotary

encoders.

• Line Input sensitivity: -16dBu to +26 dBu.

• Mic Input sensitivity: -54dBu to +6dBu.

• Separate AES/EBU input on XLR for

synchronization and/or audio input to the DSP,

which allows for use of the ADC2 for redithering

and limiting of digital signals.

Synchronization

• Internal sync selectable 44.1kHz, 48kHz, 88.2kHz,

96kHz, 176.4kHz, 192kHz.

• External sync from Wordsync Input (BNC) or from

AES/EBU input.

• Wordsync output on a BNC connector.

Metering

• One input / output level bargraph per channel

with short peak hold

• One gain reduction bargraph per channel.

• Two over LEDs

• Two numerical displays for peak hold and level

settings.

•

Reference for level setting can be altered

1 2 3 4 5 6 7 ... 14 15

Comentarios a estos manuales

Sin comentarios

WEISS GAMBIT ADC2 Instrucciones de operaciones Pagina 2

Comentarios a estos manuales